Models Inc

Does anyone know anything about a modeling agency in Boston but called the model Club Inc?

Yes, someone knows the answer?!? I want to start modeling.

Models Inc.

NEW – BRASS Overland Models, Inc. – UP 4-8-4 FEF-3 Steam Locomotive & Tender $1,699.00

Overland Models, Inc. NYC FT, A-B #1600 -1603 OMI – 0535. O Scale Model R.R. $1,400.00

2RAIL BRASS OVERLAND MODELS INC. PRR CLASS(P5A)ELECTRIC STILL IN FACTORY PLASTIC $1,095.00

Overland Models Inc 0 scale Chessie GP40-2 loco $890.00

UNION PACIFIC RR SD70M, HO SCALE BRASS DIESEL LOCOMOTIVE, OVERLAND MODELS, INC. $500.00

Overland Models Inc. CB&Q SD24 High Hood $335.00

Micro-Scale Models Inc. H.J.Zane Mercantile HO Kit No.Limited Edition MS-W004 $295.00

Hallmark Models, Inc. Dual-Powered FT-A&B Set for Bostn & Maine (B&M) $289.95

MONTGOMERY BROOM MANUFACTURING CO by MICRO-SCALE MODELS INC KIT MSM-B161 RARE! $275.00

OVERLAND MODELS, INC. NS DASH 8-40C # 8689-8713 $200.00

Overland Models Inc – NATX 98765 PD-3000 Covered Hopper c/p Brass $175.00

OVERLAND MODELS INC BRASS N-SCALE UNION PACIFIC SD 90 MAC – H RD # 8200 $165.00

OVERLAND MODELS INC BRASS N-SCALE UNION PACIFIC SD 90 MAC – H RD # 8201 $165.00

2 RAIL O SCALE BRASS GPEX EXPRESS MILK CAR OVERLAND MODELS INC. TYPE’B’ W/ELEC $162.50

Overland Models, Inc. Union Pacific CA-10 caboose $124.25

HALLMARK MODELS INC. EMD GP 38 BRASS ENGINE D T & I RR $109.99

HO scale Two Stall Engine House – Micro-Scale Models Inc. No. 266 $100.00

Atlas Model Railroad Co. Inc. Quantum Engineer Controller. $98.64

N Scale EMD GP-7 Hallmark Models Inc.STD Version $75.00

N Scale Hallmark Models Inc.Alco RS-1 Unpainted $75.00

Atlas Model Railroad Co. Inc HO Scale 18″ Through Truss Bridge $50.31

HO Scale Magnuson Models, Inc. – MERCHANTS ROW III $50.00

HO Scale Magnuson Models, Inc. – MERCHANTS ROW II $50.00

International Models,Inc. Timber Bridge # 42 $49.95

Atlas Model Railroad Co. Inc. HO Scale Roundhouse Kit. $48.83

Atlas Model Railroad Co. Inc. HO Scale 19th Century American Curch Kit. $46.36

Atlas Model Railroad Co. Inc HO Scale Manually Operated Turntable $45.37

Atlas Model Railroad Co. Inc. N Scale Suburban Passenger Station Kit $41.43

Gloor Craft Models HO Scale Sunset Fireworks INC $40.00

TWO STALL ENGINE HOUSE by MUIR MODELS INC – CRAFTSMAN KIT # 029-2295 $39.95

Atlas Model Railroad Co. Inc. HO Scale Drive-In Bank Kit $37.48

Atlas Model Railroad Co. Inc N Scale Manually Operated Turntable $37.48

Atlas Model Railroad Co. Inc. HO Scale Car Was Kit $37.48

Atlas Model Railroad Co. Inc. HO Scale Produce Market Kit $37.48

GRAND JUNCTION PIGGY BACK DEPOT by MUIR MODELS INC – CRAFTSMAN KIT # 036 RARE $36.95

Atlas Model Railroad Co. Inc N Scale Turntable Motor Drive $34.52

Radio Controlled Models, Inc. Digital w/Speakers, Cattle Sounds, 2″ speaker $35.96

Atlas Model Railroad Co. Inc. HO Scale Contemporary Diner Kit $35.02

Atlas Model Railroad Co. Inc N Scale Signal Tower $34.52

HOn3 Rio Grande Models Craftsman Wood & Metal Kit 3092-AF AC&F Reefer Truck Inc $33.00

Atlas Model Railroad Co. Inc. HO Trainman Branch Line Station Kit $31.56

Atlas Model Railroad Co. Inc. HO Trainman Rural Station Kit $31.56

Atlas Model Railroad Co. Inc N Scale Barb’s Bungalow Home Kit. $31.56

Atlas Model Railroad Co. Inc HO Scale 47 Piece Over N’ Under Pier Set $29.59

SMOOTH SIDE MODELS INC. #UP407 UP SLEEPER 6-6-4 PAINTED $29.99

Roundhouse Kit Great Northern 88003 Ore Car HO Scale Model Die Casting Inc $27.00

Atlas Model Railroad Co. Inc. HO Scale Passenger Station Kit $23.67

Atlas Model Railroad Co. Inc. HO Scale Roadside Restaurant Kit $23.67

QUALITY CRAFT MODELS, INC. PENNSYLVANIA N5C CABOOSE # 346, 6.0 FN $20.00

HO Walthers Yank Model Research, Inc. Butane Gas Tank Kit #110 $19.95

MICRO-SCALE MODELS INC – RAILROAD MAINTENANCE OFFICE SEALED BOX FSM $19.95

American Model Builders Inc – LaserKit Chicago Great Western 28′ EV Wood Caboose $18.99

Atlas Model Railroad Co. Inc. HO Scale Elevated Gate Tower Kit $13.81

Atlas Model Railroad Co. Inc HO Scale Trackside Shanty Kit. $12.13

Atlas Model Railroad Co. Inc HO Scale Refreshment Stand Kit. $11.94

Atlas Model Railroad Co. Inc. HO Scale Deck Bridge Kit $11.84

Magnuson Models Inc. HO No.439-542 1245 N. Water Street Kit $11.50

Atlas Model Railroad Co. Inc HO Scale Station Platform Kit. $10.85

HO Scale International Model Inc. Open Ended Combine Kit VINTAGE $9.99

Muir Models Inc. HO No.102 Signal Tower $9.99

Muir Models Inc. HO No.024-1495 Los Patos City Water Tower $9.99

Magnuson Models Inc. HO No.439-540 White Tower Restaurant $9.99

North Eastern Scale Models Inc. HO Tenement Row Kit $9.99

American Model Builders Inc. HO Springfield Depot Kit $9.99

American Model Builders Inc. HO GM&O Depot at Farber Kit $9.99

---

Presto 04820 PopLite hot air popper $29.99 Plug in Prestos PopLite and the party begins. In less than 2.5 minutes you will have up to 18 cups which is equal to two large bowlfuls of fluffy popcorn with virtually no unpopped kernels. And because the machine uses hot air instead of oil the resulting snack is healthier and lower in calories. Thats not to say you can nott add butter in fact the half cup measuring cup on top of the popper doubl…

Whirlpool KitchenAid Side By Side Refrigerator Quarter Turn Water Filter …

Frigidaire WF2CB PureSource2 Ice And Water Filtration System …

Antennas Direct DB8 Multidirectional HDTV Antenna $64.59 This powerful multidirectional HDTV antenna lets you receive over-the-air high-definition signals and features up to a 15.8dB gain for improved reception….

Ultra Dance 13 $13.99 …

Winning London $6.86 Why is it that, in such a cynical age, Mary-Kate and Ashley Olsen aren’t more wary of a backlash against adorableness? Just when pop culture’s more cantankerous hounds were harboring hopes that the preeminent pair of sugar-and-spice girls would grow into a couple of gawky teenagers, they’ve proved themselves more lovable than ever with Winning London. Here, they’re tasked with delivering semimatur…

Electric Video Blue Series: Collect Series 1 [VHS] $14.98 …

---

Nitro Models Extra 330 90 – 63" Spare Parts: Decal Sheet for Nitro Models Extra 330 90 – 63" $3 Nitro Models Extra 330 90 – 63″ Spare Parts: Decal Sheet for Nitro Models Extra 330 90 – 63″

Models, Inc. #3 Cover: Watson and Mary Jane $124.99 Scott Clark Models, Inc. #3 Cover: Watson and Mary Jane – Wall Mural

R/C Model Pilot #3 $7.5 These model airplane pilots are designed for CMP’s range of ARFs.  Total of eight different models which are all pre-painted and no further job is needed!

R/C Model Pilot #6 $7.5 These model airplane pilots are designed for CMP’s range of ARFs.  Total of eight different models which are all pre-painted and no further job is needed!

R/C Model Pilot #7 $7.5 These model airplane pilots are designed for CMP’s range of ARFs.  Total of eight different models which are all pre-painted and no further job is needed!

AEO K-T1 Thrust Meter $40 A thrust meter is used to measure the thrust of the power systems. It tells us if the thrust can be up to the mustard of the models even if we do not have any data of the systems. It also can be used as a voltage meter and tachometer.  

Gens ace 4800mah 2S3P 7.4V 25C saddle pack Lipo battery $28.65 Capacity: 4800MAH Voltage: 7.4V Size:69.1 * 46.48 *24.9mm(L * W * H) Weight: 272g Packaging Plug: Banana 4.0 Usage: Gens ace’s saddle hardcase RC lipo pack with high capacity of 4800mAh for all 1/12 Scale T bar car models such as Tamiya Williams FW14B Renault etc.

8×4 APC ‘E’ Electric Airplane Propeller $3.95 Many experienced electric flyers will now use only APC ¡¥E¡¦ series props on their electric models – try one and see! Product Information Specially designed for Electric Flight Thin electric propeller High performance glass filled propeller Preferred by many

8×3.8 APC ‘E’ Electric Airplane Propeller $3.95 Many experienced electric flyers will now use only APC ¡¥E¡¦ series props on their electric models – try one and see! Product Information Specially designed for Electric Flight Thin electric propeller High performance glass filled propeller Preferred by many

Syma i.Copter iRemote Cntrol Helicopter Adapter for Syma S107, S111G, S109G, S108G, S102G RC Helicopters $19.95 I-helicopter operation steps: – Download and install the “i.Copter Syma” App from the App Store (For UDI products install “udirc” App from the app store) – Charge the transmitter and iHelicopter via USB – Plug the transmitter in the audio jack of your iPhone, iPad or iPod Touch – Turn the volume to the max – Fly the iHelicopter! Notes: 1. Apple iPhone 4 NOT included 2. Designed to work with the apple products and Androids devices 3. The “iPhone/iPad/ipodtouch ” is a trademark of Apple Inc., registered in the U. S. And other countries. 4. For Syma s107, s111g, s109g, s108g, s102g 5. For UDI U809, U810

Gens ace 3800mah 6S1P 22.2V 25C Lipo battery pack $65.93 Capacity: 3800MAH Voltage: 22.2V Size: 138.82 * 42.62* 51.91mm (L * W * H) Weight: 628g Discharge rate: 25C Continuous， 50C Burst Charge rate: 5C charging acceptable Plug:  4.0 Banana Application : Acepow Gensace 3800mah 22.2V (6S1P) 25C with JST/XH balance connector, 25C high discharge rate ,  able to be charged by 5C!,Suitable for Align  T-REX 550E  , Kyosho Inferno GT series, Kysho Evola ,Mad Force Series, Castle 4WD Fusion PRO Buggy. Aerobatic models around 60" wingspan such as the Sebart Angel 50 and Extreme Flight Extra 300 58". Also suits sports models up to around 70" wingspan.

ARF Foam Field Stand-Blue $11 This foam field stand is perfect for the Electra Jet, small F-86 and similar sized models. It is made from a sturdy foam that will support a fairly heavy model without issue and poses no risk of scratching or denting your aircraft. The openings can be trimmed to fit your model with a band saw or utility knife if necessary and a drawing is included for trimming the stand to fit the F-86 and Electra jet.

ARF Foam Field Stand-Green $11 This foam field stand is perfect for the Electra Jet, small F-86 and similar sized models. It is made from a sturdy foam that will support a fairly heavy model without issue and poses no risk of scratching or denting your aircraft. The openings can be trimmed to fit your model with a band saw or utility knife if necessary and a drawing is included for trimming the stand to fit the F-86 and Electra jet.

NitroModel Low-Wing Super Aerobatic Trainer 40 – 65" Nitro Gas Radio Remote Controlled Airplane $199.95 This NitroModel Low-Wing Trainer 40 is an ideal second model. One of the best selling sports models for rc flyers. When you’ve mastered that ‘trainer’ you’ll need to move on, so look no further than the NitroModel Low-Wing Trainer 40! Not only is the NitroModel Low-Wing Trainer 40 an ideal second model, it has enough new challenges in terms of flight performance to suit sports modelers as well. The NitroModel Low-Wing Trainer 40 has often been compared to pure ‘Aerobatic’ models in terms of looks, but then been found to offer the performance to match. Specs: Wing Span: 65in / 1650mm Wing Area: 686sq in / 45sq.dm Flying Weight: 5lb / 2300g Fuselage Length: 49.2in / 1250mm Requires: Radio Required: 4 channels 4servos Engine Required: 2c 0.40 – 0.46 cu in Features Low wing aerobatics trainer. Top quality balsa and plywood construction. Premium hand iron-on covering film. Stable but maneuverable characteristics. Comes with all hardware and accessories. Perfect for intermediate flyers. Planes of a low wing design are better suited to aerobatics!  

Gens ace 3800mah 5S1P 18.5V 25C Lipo battery pack $55.24 Capacity: 3800MAH Voltage: 18.5V Size: 136.53 * 42.95 * 43.3mm (L * W * H) Weight: 525.03g Discharge rate: 25C Continuous， 50C Burst Charge rate: 5C charging acceptable Plug:  4.0 Banana Application : Acepow Gens ace 3800mah 18.5V (5S1P) 25C with JST-XH balance connector,25C high discharge rate, able to be charged by 5C! Suitabel for Kyosho Inferno GT Series,Kyosho Evola,Mad Force Series ,Castle 4WD Fusion PRO Buggy ,  Fixed Wing – Extreme Flight 58" Extra 300 and other 50" – 60" 3d aerobatic models. Also suits the T-Rex 500 helicopter for sport and general aerobatic flying on a 16T pinion.

AEO 9V 2.5A UBEC $7.5 AEO UBEC is a device designed to provide switch mode voltage step down operation to power up the model on-board RC receiver and servo systems. It is capable to regulate an up-to 23V voltage source, down to a stable  9 V voltage output. It can be used in small to medium size electric powered RC helicopter and aero-plane models, as well as gas powered model and robotic applications .    Features – Small and lightweight – High efficient switch mode design with negligible heat dissipation compare to the linear voltage regulation mode – The PCB shielded design and output EMF coil makes the stable and low noise voltage output possible – The built-in Input voltage reverse protection prevents any damage to the AEO UBEC in a reverse input voltage connection

AEO 9V 4.5A UBEC $11 AEO UBEC is a device designed to provide switch mode voltage step down operation to power up the model on-board RC receiver and servo systems. It is capable to regulate an up-to 23V voltage source, down to a stable 9V voltage output. It can be used in small to medium size electric powered RC helicopter and aero-plane models, as well as gas powered model and robotic applications . Features – Small and lightweight – High efficient switch mode design with negligible heat dissipation compare to the linear voltage regulation mode – The PCB shielded design and output EMF coil makes the stable and low noise voltage output possible – The built-in Input voltage reverse protection prevents any damage to the AEO UBEC in a reverse input voltage connection

AEO 7.2V 4.5A UBEC $11 AEO UBEC is a device designed to provide switch mode voltage step down operation to power up the model on-board RC receiver and servo systems. It is capable to regulate an up-to 23V voltage source, down to a stable  7.2 V voltage output. It can be used in small to medium size electric powered RC helicopter and aero-plane models, as well as gas powered model and robotic applications .    Features – Small and lightweight – High efficient switch mode design with negligible heat dissipation compare to the linear voltage regulation mode – The PCB shielded design and output EMF coil makes the stable and low noise voltage output possible – The built-in Input voltage reverse protection prevents any damage to the AEO UBEC in a reverse input voltage connection

AEO 12V 2.5A UBEC $7.5 AEO UBEC is a device designed to provide switch mode voltage step down operation to power up the model on-board RC receiver and servo systems. It is capable to regulate an up-to 23V voltage source, down to a stable  12 V voltage output. It can be used in small to medium size electric powered RC helicopter and aero-plane models, as well as gas powered model and robotic applications .    Features – Small and lightweight – High efficient switch mode design with negligible heat dissipation compare to the linear voltage regulation mode – The PCB shielded design and output EMF coil makes the stable and low noise voltage output possible – The built-in Input voltage reverse protection prevents any damage to the AEO UBEC in a reverse input voltage connection

AEO7.2V 2.5A UBEC $7.2 AEO UBEC is a device designed to provide switch mode voltage step down operation to power up the model on-board RC receiver and servo systems. It is capable to regulate an up-to 23V voltage source, down to a stable  7.2 V voltage output. It can be used in small to medium size electric powered RC helicopter and aero-plane models, as well as gas powered model and robotic applications .    Features – Small and lightweight – High efficient switch mode design with negligible heat dissipation compare to the linear voltage regulation mode – The PCB shielded design and output EMF coil makes the stable and low noise voltage output possible – The built-in Input voltage reverse protection prevents any damage to the AEO UBEC in a reverse input voltage connection

Airfield 1470mm 5 Channel B-25 Bomber Twin Brushless Power Extreme Detail RC Radio Control WarBird Airplane ARF Receiver Ready w/ Electric Retract $289 The Airfield B-25 Mitchell Receiver Ready Version Comes Out Of The Box Is 90% Finished, With Full Servos , Out runner Brushless Motor x 2 , Brushless ESC x 2 & Electric Servo less Retract Landing Gear Installed. The new Airfield B-25 Mitchell is a fantastic large scale model that has both the design and appearance of the real bomber. The B25 has plenty of power for short distance take-offs and aerobatic action, not forgetting the retracts which finish off the realism of this superb bomber. Amaze all around you as you showcase your talents with this amazing model. The B-25 Mitchell is constructed from a highly durable EPO-FLEXY foam. The kit itself is pre-assembled and includes a whopping 8 9g servos to move all of the control surfaces. It has a massive wingspan of 1470mm and is a whopping 1130mm long.  Two brushless 40A ESC’s are installed to power the twin brushless motors and drive the scale 3 bladed counter rotating props. The model also has working navigational LEDS to complete the scale appearance. FLY RC MAGAZINE Flight Report by Mike Lee There have been many models of the venerable B-25 Mitchell bomber, and for good reason. Modelers like warbirds, and this warbird has a generous wing size, good tail moments and it’s a twin-engine aircraft. So it lends itself to being a very easily adapted design from full-scale to model size. One of the latest B-25 models is from Airfield RC and sold by Nitroplanes in the U.S. It is a faithful sport-scale reproduction of the B-25, including the mild "gull" wing design that is overlooked by many examples.     The B-25 depicted by Airfield RC replicates the B-25D named Tondelayo, after famous screen actress Hedy Lamarr in her starring role of the 1942 film, "White Cargo." This particular 500th BS, 345th BG (known as the Air Apaches) bomber was one of three aircraft known for its remarkable mission conducted on October 18, 1943, against a 6,000 ton cargo ship near Rabaul. Tondelayo and its wingmen successfully attacked the ship, but the flight was jumped by some 50 enemy fighters while trying to return to base. In a period of 75 minutes and while skimming the ocean surface to prevent a belly attack by the fighters, Tondelayo’s top turret gunner shot down five fighters, and another four splashed into the ocean trying to make their attack on the bomber. The plane barely made it back, flying on one engine and losing both of its wingmen in the process. It required some six months of repair to return Tondelayo to service, but by then, the plane was national symbol of heroism.     Our review aircraft features a lot for the sport-scale modeler. The construction is basically an all-foam airframe using EPO plastic foam. The texture is tight and devoid of the typical "beady" look with holes and cracks. Along with the basic flight controls, the B-25 also has a very good set of electric retracts wit

Airfield 1470mm 5 Channel B-25 Bomber Twin Brushless Power Extreme Detail RC Radio Control WarBird Airplane RTF w/ Electric Retract $279 The Airfield B-25 Mitchell RTF Version Comes Out Of The Box Is 90% Finished, With Full Servos , Out runner Brushless Motor x 2 , Brushless ESC x 2 & Electric Servo less Retract Landing Gear Installed, and ready to fly RTF. The new Airfield B-25 Mitchell is a fantastic large scale model that has both the design and appearance of the real bomber. The B25 has plenty of power for short distance take-offs and aerobatic action, not forgetting the retracts which finish off the realism of this superb bomber. Amaze all around you as you showcase your talents with this amazing model. The B-25 Mitchell is constructed from a highly durable EPO-FLEXY foam. The kit itself is pre-assembled and includes a whopping 8 9g servos to move all of the control surfaces. It has a massive wingspan of 1470mm and is a whopping 1130mm long. The all up flying weight of the model is 1930g once you’ve added a receiver and 3 cell 11.1v li-po battery. Two brushless 40A ESC’s are installed to power the twin brushless motors and drive the scale 3 bladed counter rotating props. The model also has working navigational LEDS to complete the scale appearance. FLY RC MAGAZINE Flight Report by Mike Lee There have been many models of the venerable B-25 Mitchell bomber, and for good reason. Modelers like warbirds, and this warbird has a generous wing size, good tail moments and it’s a twin-engine aircraft. So it lends itself to being a very easily adapted design from full-scale to model size. One of the latest B-25 models is from Airfield RC and sold by Nitroplanes in the U.S. It is a faithful sport-scale reproduction of the B-25, including the mild "gull" wing design that is overlooked by many examples.     The B-25 depicted by Airfield RC replicates the B-25D named Tondelayo, after famous screen actress Hedy Lamarr in her starring role of the 1942 film, "White Cargo." This particular 500th BS, 345th BG (known as the Air Apaches) bomber was one of three aircraft known for its remarkable mission conducted on October 18, 1943, against a 6,000 ton cargo ship near Rabaul. Tondelayo and its wingmen successfully attacked the ship, but the flight was jumped by some 50 enemy fighters while trying to return to base. In a period of 75 minutes and while skimming the ocean surface to prevent a belly attack by the fighters, Tondelayo’s top turret gunner shot down five fighters, and another four splashed into the ocean trying to make their attack on the bomber. The plane barely made it back, flying on one engine and losing both of its wingmen in the process. It required some six months of repair to return Tondelayo to service, but by then, the plane was national symbol of heroism.     Our review aircraft features a lot for the sport-scale modeler. The construction is basically an all-foam airframe using EPO plastic foam. The texture is tight and devoid of the typical "beady" look with h

Airfield 1470mm 5 Channel B-25 Bomber Extreme Detail WarBird Airplane KIT Airframe w/ Electric Retract (Silver) $209 The new Airfield B-25 Mitchell is a fantastic large scale model that has both the design and appearance of the real bomber. The B25 has plenty of power for short distance take-offs and aerobatic action, not forgetting the retracts which finish off the realism of this superb bomber. Amaze all around you as you showcase your talents with this amazing model. The B-25 Mitchell is constructed from a highly durable EPO-FLEXY foam. The model also has working navigational LEDS to complete the scale appearance   FLY RC MAGAZINE Flight Report by Mike Lee There have been many models of the venerable B-25 Mitchell bomber, and for good reason. Modelers like warbirds, and this warbird has a generous wing size, good tail moments and it’s a twin-engine aircraft. So it lends itself to being a very easily adapted design from full-scale to model size. One of the latest B-25 models is from Airfield RC and sold by Nitroplanes in the U.S. It is a faithful sport-scale reproduction of the B-25, including the mild "gull" wing design that is overlooked by many examples.     The B-25 depicted by Airfield RC replicates the B-25D named Tondelayo, after famous screen actress Hedy Lamarr in her starring role of the 1942 film, "White Cargo." This particular 500th BS, 345th BG (known as the Air Apaches) bomber was one of three aircraft known for its remarkable mission conducted on October 18, 1943, against a 6,000 ton cargo ship near Rabaul. Tondelayo and its wingmen successfully attacked the ship, but the flight was jumped by some 50 enemy fighters while trying to return to base. In a period of 75 minutes and while skimming the ocean surface to prevent a belly attack by the fighters, Tondelayo’s top turret gunner shot down five fighters, and another four splashed into the ocean trying to make their attack on the bomber. The plane barely made it back, flying on one engine and losing both of its wingmen in the process. It required some six months of repair to return Tondelayo to service, but by then, the plane was national symbol of heroism.     Our review aircraft features a lot for the sport-scale modeler. The construction is basically an all-foam airframe using EPO plastic foam. The texture is tight and devoid of the typical "beady" look with holes and cracks. Along with the basic flight controls, the B-25 also has a very good set of electric retracts with sequencing gear doors. And if that’s not enough, it has lighting on the wing’s leading edge! What I also though was very nice to include was not only pilot figures in the cockpit but also most of the crew members in the gun positions.     It’s a large model with removable wings, which makes it convenient to place into a small car. Power is provided by twin brushless motors that run in counter-rotating directions to offset any torque effects when applying power. Our review aircraft is the RTF Version, which includes all servos, ESCs, retracts sequ

Airfield 1470mm 5 Channel B-25 Bomber Twin Brushless Power Extreme Detail RC Radio Control WarBird Airplane ARF Receiver Ready w/ Electric Retract (Silver) $289 The Airfield B-25 Mitchell Receiver Ready Version Comes Out Of The Box Is 90% Finished, With Full Servos , Out runner Brushless Motor x 2 , Brushless ESC x 2 & Electric Servo less Retract Landing Gear Installed. The new Airfield B-25 Mitchell is a fantastic large scale model that has both the design and appearance of the real bomber. The B25 has plenty of power for short distance take-offs and aerobatic action, not forgetting the retracts which finish off the realism of this superb bomber. Amaze all around you as you showcase your talents with this amazing model. The B-25 Mitchell is constructed from a highly durable EPO-FLEXY foam. The kit itself is pre-assembled and includes a whopping 8 9g servos to move all of the control surfaces. It has a massive wingspan of 1470mm and is a whopping 1130mm long. Two brushless 40A ESC’s are installed to power the twin brushless motors and drive the scale 3 bladed counter rotating props. The model also has working navigational LEDS to complete the scale appearance.   FLY RC MAGAZINE Flight Report by Mike Lee There have been many models of the venerable B-25 Mitchell bomber, and for good reason. Modelers like warbirds, and this warbird has a generous wing size, good tail moments and it’s a twin-engine aircraft. So it lends itself to being a very easily adapted design from full-scale to model size. One of the latest B-25 models is from Airfield RC and sold by Nitroplanes in the U.S. It is a faithful sport-scale reproduction of the B-25, including the mild "gull" wing design that is overlooked by many examples.     The B-25 depicted by Airfield RC replicates the B-25D named Tondelayo, after famous screen actress Hedy Lamarr in her starring role of the 1942 film, "White Cargo." This particular 500th BS, 345th BG (known as the Air Apaches) bomber was one of three aircraft known for its remarkable mission conducted on October 18, 1943, against a 6,000 ton cargo ship near Rabaul. Tondelayo and its wingmen successfully attacked the ship, but the flight was jumped by some 50 enemy fighters while trying to return to base. In a period of 75 minutes and while skimming the ocean surface to prevent a belly attack by the fighters, Tondelayo’s top turret gunner shot down five fighters, and another four splashed into the ocean trying to make their attack on the bomber. The plane barely made it back, flying on one engine and losing both of its wingmen in the process. It required some six months of repair to return Tondelayo to service, but by then, the plane was national symbol of heroism.     Our review aircraft features a lot for the sport-scale modeler. The construction is basically an all-foam airframe using EPO plastic foam. The texture is tight and devoid of the typical "beady" look with holes and cracks. Along with the basic flight controls, the B-25 also has a very good set of electric retracts with sequencing gear doors. And if that’s not enough, it

Airfield 1470mm 5 Channel B-25 Bomber Extreme Detail WarBird Airplane KIT Airframe w/ Electric Retract $249 The new Airfield B-25 Mitchell is a fantastic large scale model that has both the design and appearance of the real bomber. The B25 has plenty of power for short distance take-offs and aerobatic action, not forgetting the retracts which finish off the realism of this superb bomber. Amaze all around you as you showcase your talents with this amazing model. The B-25 Mitchell is constructed from a highly durable EPO-FLEXY foam. The model also has working navigational LEDS to complete the scale appearance.   FLY RC MAGAZINE Flight Report by Mike Lee There have been many models of the venerable B-25 Mitchell bomber, and for good reason. Modelers like warbirds, and this warbird has a generous wing size, good tail moments and it’s a twin-engine aircraft. So it lends itself to being a very easily adapted design from full-scale to model size. One of the latest B-25 models is from Airfield RC and sold by Nitroplanes in the U.S. It is a faithful sport-scale reproduction of the B-25, including the mild "gull" wing design that is overlooked by many examples.     The B-25 depicted by Airfield RC replicates the B-25D named Tondelayo, after famous screen actress Hedy Lamarr in her starring role of the 1942 film, "White Cargo." This particular 500th BS, 345th BG (known as the Air Apaches) bomber was one of three aircraft known for its remarkable mission conducted on October 18, 1943, against a 6,000 ton cargo ship near Rabaul. Tondelayo and its wingmen successfully attacked the ship, but the flight was jumped by some 50 enemy fighters while trying to return to base. In a period of 75 minutes and while skimming the ocean surface to prevent a belly attack by the fighters, Tondelayo’s top turret gunner shot down five fighters, and another four splashed into the ocean trying to make their attack on the bomber. The plane barely made it back, flying on one engine and losing both of its wingmen in the process. It required some six months of repair to return Tondelayo to service, but by then, the plane was national symbol of heroism.     Our review aircraft features a lot for the sport-scale modeler. The construction is basically an all-foam airframe using EPO plastic foam. The texture is tight and devoid of the typical "beady" look with holes and cracks. Along with the basic flight controls, the B-25 also has a very good set of electric retracts with sequencing gear doors. And if that’s not enough, it has lighting on the wing’s leading edge! What I also though was very nice to include was not only pilot figures in the cockpit but also most of the crew members in the gun positions.     It’s a large model with removable wings, which makes it convenient to place into a small car. Power is provided by twin brushless motors that run in counter-rotating directions to offset any torque effects when applying power. Our review aircraft is the RTF Version, which includes all servos, ESCs, retracts seq

North American AT-6F Texan 160 – 82" Nitro Gas Radio Remote Controlled ARF RC WWII Warbird Airplane $399 North American AT-6 Texan 160 – 82" Nitro Gas Radio Remote Controlled ARF RC Airplane The AT-6 Texan ARF Nitro Gas Plane includes decals that are already applied on the fuselage under clear coating for more durable use. This contains a fiberglass fuselage. Wing panel, elevator & tail plane are painted over high-quality balsa wood. The wing section is also fiberglass molded Wingspan 82" Fuselage Length 55" Recommended Engine Size 2c/160 Flying Weight 11.9 lbs – 12.3 lbs Wing Area 1,007 sq in Radio 4~~5 Ch 5~~6 Servos Airfoil NACA 2415 The North American AT-6 Texan won wide acclaim as one of the most well used advanced trainers not only during WWII but also beyond. This specefic AT-6F Texan is a perfect example of this post WWII use as it is restored as and is painted in the colors of the Korean War "Mosquito", a low-level support and target identifier aircraft used to support the faster jets of the period. Nitro Models ‘ AT-6 Texan is really popular and can be found at flying field and events in the many regions all over the United States.  Do not miss your chance to relive a piece of history! Engine/Radio Equipments Sold Separately.  Engine/Radio NOT included.  Download Manual Here  

Giant Scale CMP Super Chipmunk ARF 120 – 71" Nitro Gas Radio Remote Controlled Engine Powered Scale Airplane RC Plane $299.99 The Super Chipmunk has a professionally painted red and white fiberglass fuselage that has a attractive and shiny surface. It also has pre-covered rib wings made by high quality balsa wood. This ARF aircraft has pre-painted fiberglass wheel pants, fiberglass cowling, clear PVC canopy, a beautiful decal sheet and high quality hardware accessories. The Super Chipmunk 140 size is different from other gel-coated models in which the painting wipes out the joint line resulting in a perfect look for the plane! Specs: Wing Span: 71" Weight: 9.47lb Length: 56.3" Wing Area: 806sq.in Wing Loading: 26.97oz./sq.ft. Engine Required: 2c 90 ~ 108, 4c 91 ~ 120 Radio Required: 5 Channel 6 Servos Overall, this almost-ready-to-fly giant scale airplane is a superb combination of good looks and perfect performance.   Features: All parts are nicely wrapped in thin foam and plastic bags. All balsa-wood rib wing professionally covered with red white and blue stripes. Aileron, elevator, vertical and rudder are built up and sheeted over making it strong and light. Control surfaces are professionally hinged and installed by factory. High quality fiberglass fuselage, cowl and wheel pants. Decals are professionally pre-applied by factory. Canopy is tinted with white trims. Complete hardware pack: fuel tank, wheels, all rods and horns, engine mount etc. One and only Super Chipmunk 120 in the Market! This is an Almost-Ready-to-Fly Aircraft!  Engine/Radio Equipment NOT included.  ARF Kit requires assembly.

T-Model ARF Brushless Electric Jet w/ 41" Wing! $119 The T-Model  is a modern multi-role jet fighter aircraft designed in the United States. Designed as a lightweight fighter, it evolved into a successful multi-role aircraft.  A pusher-prop jet capable of effortless aerobatics with a unlimited vertical when flying the version equipped with a 600-800W brushless motor. The ARF kit features a beautifully pre-painted fiberglass fuselage with balsa sheeted wings. The high pre-fabrication grade of the model allows for the first sorties in no time. The T Models are made out of fiberglass fuselage and balsawood wing. The film cover has a very attractive design with, depending on the version, some complicated metallic colors. Detailed and pictured step-by-step instruction manual. Please refer to the table for more information’s on parameter and the compatible motors. T-Model YTM-0711 Wing span 1050mm Fuselage length 1070mm Flying weight 1650g Wing area 28 sq dm Color Red Wing Material Balsa Fuselage Material Fiberglass Engine Brushless 500W Radio 4 channel 4 servo Packing size 1100×500×160 Wing Span: 41 in / 1050 mm Wing Area: 434 sq in / 28 sq dm Flying Weight: 3.5lbs / 1600g Fuselage Length: 42 in / 1070 mm Requirements for this ARF Kit Outrunner Brushless Motor :600W – 800W Radio Required: 4channels ; 5 Servos Decals are included for re-creating the exciting USAF Thunderbirds trim scheme

CMP Marathon 20~24cc AEROBATIC AIRPLANE RADIO CONTROLLED Airplane ( Giant ARF Plane ) $199 20~24cc AEROBATIC AIRPLANE ALMOST-TO-FLY RADIO CONTROLLED     Wingspan 1800mm Length 1650mm Weight 5.3~5.4 kg Wing Loading 91~93 dm/2 Airfoil Naca 0012 Wing Area 58 dm/2 Radio Control 4 Ch 6 Servos purchase separately Gas Engine 20~24 purchase separately   The CMPro Marathon is a beautifully finished aerobatic airplane with nice and simple construction. It comes pre-covered in an eye-catching design, you don?t even need to spend any time for further decoration since all the complicated painting is finished by the factory. Featuring all balsa construction (fuselage, wings and tails), the Marathon is light but extremely strong. The epoxy landing gear and polystyrene wheel pants also contribute to minimize the weight but maximum durability. The Marathon gives superb flying performance because: Full-aileron design with two separate servo controls, efficiently increases flying speed and makes the plane more responsive. Approx. 50% elevator in proportion. The elevator also uses two separate servo controls in order to increase thrusts and secure stability, such a design is not commonly used in models with the same size. Approx. 60% rudder in proportion. The 0.5mm linkage wire gives a direct control of the rudder. These features greatly enhance extreme performance, such as 3D manoeuvre and hovering. Assemble the Marathon Because of the simple and neat construction, the Marathon is very easy to assemble. Assembly is even fun if you are using a 20cc gas engine since the plane is specially designed for this size of engine. The fiberglass cowling is also designed for easy gas engine assembly and help reducing heat. The CMPro Marathon is combination of great looks and superb flying performance. Anyone wish to try precision aerobatics without spending a lot of time for building must not miss this beauty! Clear PVC canopy to allow light to pass through easily, with pre-finished white trim line.   Designed to give superb performance with gas engine. Provides plenty of room to install servos and etc..   The main wings are to be joined by two alloy tubes. You will find it easy to set up and to carry around! The kit also features a strong and durable fiberglass landing gear, and a pair of nicely painted wheel pants made from high impact Polystyrene. The bottom color pattern is simple and clear, which helps greatly with orientation.     Pre-painted fiberglass cowling to give a perfect appearance and help to reduce heat efficiently.     Design of the fuselage is clear and open to give a panoramic view of the construction and to allow easy access for assembly. All the components are pre-finished including a quality hardware pack. The kit includes all that you need other than radio, engine and adhesives to get to a flying standard.

Hero RC 26" H853 Newest 3 Channel Outdoor Volitation Metal RC Helicopter w/ Built in Gyro $89.99 The new H853 Volitation helicopter is a metal helicopter with a built in gyro to help stabilize your flights. This model is a 3 channel helicopter that is specially designed to fly in the outdoor environment. The H853 Volitation is great to take to the park to fly, and since it is a beginner model, you will be able to get it up and flying in no time. A full function 3 channel radio control allows the H853 Volitation to maneuver Left/Right, Forward/Reverse, and Up/Down. The real life styling of the design almost resembles the real thing, but is small enough so you can fly it almost anywhere outdoors. With its 3 channel digital proportional control and built in gyro, you will have a great first time flying experience. The airframe is extremely lightweight allowing this helicopter to fly over 100m high. When flying at high altitudes, your helicopter will need to be made real sturdy, the H853 Volitation is made from the highest grade material so that it can withstand most crashes. Running two powerful 180 Main Motors and an N20 Tail Motor, this helicopter can outperform most models in its class without breaking a sweat. Measuring at a length of 26.18 inches with a Main Rotor Diameter of 21.06 inches, this is a great model to start with if you are planning to get into this amazing fast paced hobby.     Feature: Full function 3 channel radio control (Left /Right, Forward/Backward, Hover, and Lands) Real life helicopter styling 3 channel digital proportional control Built in Gyro for Extra Stability Unique material withstand crashes Flies over 100m high 2 powerful 180 main motors + N20 tail motor Newly designed super strong crashworthy propeller Altitude and rotor speed control Flight stabilizing system Super lightweight airframe Brake for easy landing Up to 60m (200 ft) radio control range Ready To Fly, Easy To Fly Complete Kit, Ready to Fly (Everything is included and 100% assembled — only required 8 AA batteries for the radio transmitter to start flying)   Specification: Length: 665mm (26.18 inch) Main Rotor Diameter: 535mm (21.06 inch) Battery: 7.4V Lipo battery Flight Time: 10 minutes   Package Include: Helicopter (100% assembled) 3 Channel Radio Remote Controller Rechargeable 7.4V Lipo Battery for Helicopter AC wall battery charger English Manual  

Hero RC 26" H853 Newest 3 Channel Outdoor Volitation Metal RC Helicopter w/ Built in Gyro (Yellow) $89.99 The new H853 Volitation helicopter is a metal helicopter with a built in gyro to help stabilize your flights. This model is a 3 channel helicopter that is specially designed to fly in the outdoor environment. The H853 Volitation is great to take to the park to fly, and since it is a beginner model, you will be able to get it up and flying in no time. A full function 3 channel radio control allows the H853 Volitation to maneuver Left/Right, Forward/Reverse, and Up/Down. The real life styling of the design almost resembles the real thing, but is small enough so you can fly it almost anywhere outdoors. With its 3 channel digital proportional control and built in gyro, you will have a great first time flying experience. The airframe is extremely lightweight allowing this helicopter to fly over 100m high. When flying at high altitudes, your helicopter will need to be made real sturdy, the H853 Volitation is made from the highest grade material so that it can withstand most crashes. Running two powerful 180 Main Motors and an N20 Tail Motor, this helicopter can outperform most models in its class without breaking a sweat. Measuring at a length of 26.18 inches with a Main Rotor Diameter of 21.06 inches, this is a great model to start with if you are planning to get into this amazing fast paced hobby.   Feature: Full function 3 channel radio control (Left /Right, Forward/Backward, Hover, and Lands) Real life helicopter styling 3 channel digital proportional control Built in Gyro for Extra Stability Unique material withstand crashes Flies over 100m high 2 powerful 180 main motors + N20 tail motor Newly designed super strong crashworthy propeller Altitude and rotor speed control Flight stabilizing system Super lightweight airframe Brake for easy landing Up to 60m (200 ft) radio control range Ready To Fly, Easy To Fly Complete Kit, Ready to Fly (Everything is included and 100% assembled — only required 8 AA batteries for the radio transmitter to start flying) Specification: Length: 665mm (26.18 inch) Main Rotor Diameter: 535mm (21.06 inch) Battery: 7.4V Lipo battery Flight Time: 10 minutes Package Include: Helicopter (100% assembled) 3 Channel Radio Remote Controller Rechargeable 7.4V Lipo Battery for Helicopter AC wall battery charger English Manual  

UBEC-5A-HV (High Voltage Ultimate BEC) $24.95 Product Description Model UBEC-5A-HV (High Voltage) Manual User Manual Accessory A step-down voltage regulator (6V to 5.3V)   Preview The 5A-HV-UBEC is a switch-mode DC-DC regulator supplied with a 3-10 cells lithium battery pack and outputs a consistent safe power for your receiver, gyro and servos. It is very suitable for big electric RC models. Using this UBEC, the receiver can obtain the power supply directly from the main battery pack, so the additional battery pack for receiver is unnecessary.   Compared with the linear mode UBEC, the overall efficiency of the switch-mode UBEC is much higher, so it can extend the working time of the receiver battery pack, and because a switch mode UBEC can significantly reduce the heat emission, it can avoid the loss of control caused by the over-heat problem which is frequently happened with the linear mode UBEC. 1  Specification 1.1 Output Voltage: 5V or 6V (Changeable with an output-voltage select jumper ) 1.2 Continuous output current: 5 Amps 1.3 Burst output current: 7.5 Amps 1.4 Input: 8V-42V ( 3-10 cells lithium battery pack ) 1.5 Quiescent current: 20mA 1.6 Size: 48mm*27mm*9mm (L*W*H) 1.7 Weight: 30g 2  Features 2.1 Designed with an advanced switch mode DC-DC regulator IC, the max efficiency of the chip is up to 92%. 2.2 The output current is very large. 2.3 With the output short-circuit protection function. 2.4 A metal shield covers almost all the electronic components, and a filter is attached with the output wires to significantly reduce the electromagnetic interference. 2.5 With ultra-wide input voltage from 8V-42V. 2.6 Safe power on with the polarity protection function. If the input polarity is not correct, the UBEC can’t work, but it will not be damaged. What you need to do is just swapping the battery pack’s polarity. 2.7 Shows the working status with an indicator (LED), lights when the output is in normal range. 2.8 It has a switch to turn on or turn off the output. 2.9 With a step-down voltage regulator of 0.7V down as an accessory (From 6.0V to 5.3V).     

Double Horse 26" 9053 Newest 3 Channel Outdoor Volitation Metal RC Helicopter w/ Built in Gyro $79.95 The new 9053 Volitation helicopter is a metal helicopter with a built in gyro to help stabilize your flights. This model is a 3 channel helicopter that is specially designed to fly in the outdoor environment. The 9053 Volitation is great to take to the park to fly, and since it is a beginner model, you will be able to get it up and flying in no time. A full function 3 channel radio control allows the 9053 Volitation to maneuver Left/Right, Forward/Reverse, and Up/Down. The real life styling of the design almost resembles the real thing, but is small enough so you can fly it almost anywhere outdoors. With its 3 channel digital proportional control and built in gyro, you will have a great first time flying experience. The airframe is extremely lightweight allowing this helicopter to fly over 100m high. When flying at high altitudes, your helicopter will need to be made real sturdy, the 9053 Volitation is made from the highest grade material so that it can withstand most crashes. Running two powerful 180 Main Motors and an N20 Tail Motor, this helicopter can outperform most models in its class without breaking a sweat. Measuring at a length of 26.18 inches with a Main Rotor Diameter of 21.06 inches, this is a great model to start with if you are planning to get into this amazing fast paced hobby.     Feature: Full function 3 channel radio control (Left /Right, Forward/Backward, Hover, and Lands) Real life helicopter styling 3 channel digital proportional control Built in Gyro for Extra Stability Unique material withstand crashes Flies over 100m high 2 powerful 180 main motors + N20 tail motor Newly designed super strong crashworthy propeller Altitude and rotor speed control Flight stabilizing system Super lightweight airframe Brake for easy landing Up to 60m (200 ft) radio control range Ready To Fly, Easy To Fly Complete Kit, Ready to Fly (Everything is included and 100% assembled — only required 8 AA batteries for the radio transmitter to start flying)   Specification: Length: 665mm (26.18 inch) Main Rotor Diameter: 535mm (21.06 inch) Battery: 7.4V Lipo battery Flight Time: 10 minutes   Package Include: Helicopter (100% assembled) 3 Channel Radio Remote Controller Rechargeable 7.4V Lipo Battery for Helicopter AC wall battery charger English Manual  

EMB 312 Tucano 120 – 65" Nitro RC Plane ARF (Gray) $179 T he EMB 312 Tucano is a real beauty. Anyone who likes the war birds is bound to love this airplane. The kit includes a fiberglass fuselage, and is cover with a top quality military color scheme coating (similar to monokote). Once in the air, the EMB 312 truly shines with its exceptional flight characteristics. The wing loading has been optimized to make it exceptionally nimble and capable of a variety of different maneuvers. The EMB 312 Tucano RC Plane can perform loops easily from level flight. Crisp rolls, loops, inverted flight and more are all possible with the EMB 312 Tucano Nitro Powered RC Airplane! The EMB 312 Tucano is a low-wing turboprop-powered two seat basic-advanced military trainer aircraft Recognition features include low-set unswept wings. The rudder extends beyond the trailing edge of the tailplane. Large clear view canopy covering the tandem cockpit, with the rear seat higher than the front. Large exhausts on the forward cowling sides Wing Span : 65 in / 1650 mm Wing Area : 662 sq in / 43 sq dm Flying Weight : 9.25lb / 4200 g Fuselage Length : 59 in / 1500 mm Engine Required : 4 C: 1.20 cu in Radio Required : 5channels ; 8 – 9 servos Brief History The Tucano, known in Brazil as the T-27, is used in the missions of basic training, tactical support and war against drugs. This basic trainer is a aircraft with tandem seats. The Tucano was sold to Brasilia, Egypt, Honduras, Iraq, Venezuala, Peru, Argentina, Paraguay and Iran. A modified version, developed together with Shorts, was sold to the British RAF. There is also a production line in Egypt. The Embraer EMB.312 was born of a request by the Brazilian Aeronautics Ministry to design a basic trainer for use by the Brazilian Air Force. Designed in 1978 under Joseph Kovacs, the EMB.312 is a single-engine turboprop, low wing, equipped with a turbine Pratt &Whitney Canada PT6A-25C of 750shp, driving a three-bladed propeller, with student and instructor sitting in tandem under a single hood, opening sidelong. The ejection seats are placed so that the instructor, sitting behind in a higher position, has almost complete visibility ahead. On 6 December 1978, the Ministry of Aeronautics and Embraer signed an initial contract of development, including two prototypes and two examples for fatigue testing. The first prototype took off for the first time on 16 August 1980, registered as FAB 1300; the second prototype, FAB 1301, accomplished its first flight in December of the same year. A third prototype, incorporating the modifications foreseen for incorporation into the production models, received the experimental civilian registration PP-ZDK, and flew on 16 August 1982. The EMB.312 was christened Tucano (Toucan); receiving the FAB designation T-27 (or AT-27, for those used in light attack missions). From the 168 examples acquired, the first six examples were to equip the FAB Air Demonstration Squadron and these were delivered on 29 September 1983. The RAF’s basic flying trainer

NEW!! Walkera V400D02 FLYBARLESS Metal Edition Helicopter w/ 6CH 2.4Ghz DEVO-7 Transmitter RTF Combo $209 The best selling Walkera V400D02 now comes with the new Devo 7 transmitter and Devo receiver with built-in 3 axis gyro system. The Devo 7 is a 100% fully programmable transmitter so beginners to advanced pilots can fine tune the settings for different flying styles. What’s unique about the V400D02 you ask? First off Walkera is well known in designing and manufacturing remote control helicopters, and supplied them in the highest quality at competitive prices. With the popularity of flybarless helicopters increasing over the years Walkera incorporated the same technology into the V400D02 without the high price tag. Traditional helicopters have a thing called a flybar which is a mechanical stabilizer with a lot of moving parts. To keep things short the V400D02 is now flybarless which has the mechanical stabilizer removed and instead have been replaced with the state of the art Walkera 3-Axis gyro system and flybarless technology. The main advantage of being "flybarless" is there are less moving parts and allows slightly longer flight times all while having the same stability as a flybar setup. The 6 channel Walkera V400D02 comes pre-adjusted out of the box so there is no guess work on how to properly setup the helicopter. The Devo 7 transmitter has all of the flight settings already programmed in so all the pilot would have to do is charge the flight battery, install 8AA batteries to the transmitter, and read through the operating manual while the flight battery is charging with the included AC Lipo balance charger. The V400D02 features Walker’s flybarless 3-axis gyro auto stabilizing technology for precise, stable, and smooth flying. A brushed 380PF main motor, brushed tail motor, ESC, and digital servos all pre-installed and already adjusted for the first flight out the box. Having a a brushed main and tail motor helps make the V400D02 affordable for pilots who wants the next step up helicopter without leaving a hole in their pocket. Want to learn how to fly inverted? Want to learn how to do flips? Want to learn how to practice simple 3D maneuvers? The 6 channel V400D02? is perfect for intermediate and advance pilots, as it would be the perfect next step up for beginners who is stepping up from a 4ch co-axial or 4ch fixed-pitched? helicopter. Now we have to admit despite the V400D02 having a brushed motor and tail motor, we found the 380 size brushed main motor more than powerful enough for what the helicopter was designed for and the tail motor held up just fine. Having a brushed tail motor eliminates the difficult setup without having to worry about setting the rudder servo perfect for flight. What all this means is Walkera designed the V400D02 to have the same performance as the higher cost models yet very easy to maintain at the same time. Specs Main Rotor Diameter: 635mm Tail Rotor Diameter: 136mm Overall Length: 650mm Overall Weight: 510g (Battery included) Battery: 11.1V 1200mAh Li-Po Main Motor: 380PF Tail Motor: 1627PF Gyro: Wal

NEW!! 6CH Walkera V400D02 FLYBARLESS Metal Edition Helicopter Ready to Bind $149 The best selling Walkera V400D02 is now available in the BNF (bind and fly) version. This would be prefect for those who want to get one as a spare or those who already have a Devo transmitter (Devo 6, Devo 7, Devo 8, and Devo 12) A Walkera Devo transmitter is required to work with this version of the V400D02. What’s unique about the V400D02 you ask? First off Walkera is well known in designing and manufacturing remote control helicopters, and supplied them in the highest quality at competitive prices. With the popularity of flybarless helicopters increasing over the years Walkera incorporated the same technology into the V400D02 without the high price tag. Traditional helicopters have a thing called a flybar which is a mechanical stabilizer with a lot of moving parts. To keep things short the V400D02 is now flybarless which has the mechanical stabilizer removed and instead have been replaced with the state of the art Walkera 3-Axis gyro system and flybarless technology. The main advantage of being "flybarless" is there are less moving parts and allows slightly longer flight times all while having the same stability as a flybar setup. The 6 channel Walkera V400D02 comes pre-adjusted out of the box so there is no guess work on how to properly setup the helicopter. Just provide your own Devo transmitter and program it with the settings provided from the manual and your good for the first flight. The V400D02 features Walker’s flybarless 3-axis gyro auto stabilizing technology for precise, stable, and smooth flying. A brushed 380PF main motor, brushed tail motor, ESC, and digital servos all pre-installed and already adjusted for the first flight out the box. Having a a brushed main and tail motor helps make the V400D02 affordable for pilots who wants the next step up helicopter without leaving a hole in their pocket. Want to learn how to fly inverted? Want to learn how to do flips? Want to learn how to practice simple 3D maneuvers? The 6 channel V400D02 is perfect for intermediate and advance pilots, as it would be the perfect next step up for beginners who is stepping up from a 4ch co-axial or 4ch fixed-pitched? helicopter. Now we have to admit despite the V400D02 having a brushed motor and tail motor, we found the 380 size brushed main motor more than powerful enough for what the helicopter was designed for and the tail motor held up just fine. Having a brushed tail motor eliminates the difficult setup without having to worry about setting the rudder servo perfect for flight. What all this means is Walkera designed the V400D02 to have the same performance as the higher cost models yet very easy to maintain at the same time.   Specs Main Rotor Diameter: 635mm Tail Rotor Diameter: 136mm Overall Length: 650mm Overall Weight: 510g (Battery included) Battery: 11.1V 1200mAh Li-Po Main Motor: 380PF Tail Motor: 1627PF Gyro: 3-axis Features Metal Rotor Head flybarless design. Improved with low power loss and great efficiency Controlled by 3-a

Syma S018 Radio Control Micro Air Wolf Helicopter READY TO FLY!! $28.95 Syma S018 Radio Control Micro Air Wolf Helicopter READY TO FLY!!   Mini palm size helicopter is the cutest and most amazing thing that I’ve seen lately! Measuring only about seven inches long and weighing about 23 grams, this palm size helicopter is a Fascinating flying machine that is very stable and easy to fly in the smallest of spaces. This helicopter is made of tough expanded Polypropylene foam, features auto stability system to make this chopper easy to operate indoors. It comes assembled and ready to fly with an innovative pre-installed three channel proportional wide beam infra red control system. The lightweight Lithium Polymer rechargeable battery pack is at the size of a finger nail!!! Now the amazing experience of real helicopter flight can be enjoyed by everyone. This RC Helicopter is fully assembled with all pre-flight adjustments completed. Simply remove it from the box, charge and insert the batteries, and get ready to take-off. The new tail fin design makes it very stable when flying in the air. Also has rotary speed control and a flight stabilizing system.   The Syma S018 has an incorporated auto stability system making it easy to fly. Function: up and down ,turn left and turn right ,forward and backward Pre installed 3 channel proportional wide beam infrared control system that is also tri-band A,B,C this allows several helicopters to be flown at once. Recharging takes place via the transmitter included. Transmitter has an alignment trimmer for left and right controls. Suitable for indoor flying and also outdoor flying in calm weathers. style=”FONT-SIZE: 10pt; FONT-FAMILY: Arial”> Unique 3-channel wide infrared remote control (typical mini helicopters only feature 2-channel controls) style=”FONT-SIZE: 10pt; FONT-FAMILY: Arial”> – Helicopter features built-in rechargeable lithium battery (recharged by remote controller) style=”FONT-SIZE: 10pt; FONT-FAMILY: Arial”> – Remote controller powered by 6 x AA batteries (sold separately) style=”FONT-SIZE: 10pt; FONT-FAMILY: Arial”> – Wireless range: 6 meters radius (manufacturer rated) style=”FONT-SIZE: 10pt; FONT-FAMILY: Arial”> – Recharge time: ~15-20 minutes style=”FONT-SIZE: 10pt; FONT-FAMILY: Arial”> – Flight time: ~5 minutes / charge Length 6.9inches (177mm) Width 1.57inches (40mm) Height  3.18inches (81mm)  Helicopter weight: Only 10g, including Li-Poly battery  Rechargeable Flight Battery: High capacity integral Lithium Polymer battery  Charger: Integral Transmitter/Charger supplied with LED indicator/Auto shut off. Simply plug in and charge, with easy to use connections  Flight duration: 7 to 10 minutes  Charge time: 15-20 minutes for full charge  Ready To Run: Supplied completely assembled and ready-to-fly, with pre-installed 3 Channel Proportional Infra Red Control System  Range: Up to 100 feet (30 meters). Frequency: Infra Red Control System – Bands A & USB allow up to two models to be flown at the same

Embraer emb312F Nitro Gas ARF Radio Remote Control RC Airshow Airplane $179 T he EMB 312 Tucano is a real beauty. Anyone who likes the war birds is bound to love this airplane. The kit includes a fiberglass fuselage, and is cover with a top quality blue and gray scheme coating (similar to monokote). Once in the air, the EMB 312 truly shines with its exceptional flight characteristics. The wing loading has been optimized to make it exceptionally nimble and capable of a variety of different maneuvers. The EMB 312 Tucano RC Plane can perform loops easily from level flight. Crisp rolls, loops, inverted flight and more are all possible with the EMB 312 Tucano Nitro Powered RC Airplane! The EMB 312 Tucano is a low-wing turboprop-powered two seat basic-advanced military trainer aircraft Recognition features include low-set unswept wings. The rudder extends beyond the trailing edge of the tailplane. Large clear view canopy covering the tandem cockpit, with the rear seat higher than the front. Large exhausts on the forward cowling sides Wing Span : 65 in / 1650 mm Wing Area : 662 sq in / 43 sq dm Flying Weight : 9.25lb / 4200 g Fuselage Length : 59 in / 1500 mm Engine Required : 4 C: 1.20 cu in Radio Required : 5channels ; 8 – 9 servos Brief History The Tucano, known in Brazil as the T-27, is used in the missions of basic training, tactical support and war against drugs. This basic trainer is a aircraft with tandem seats. The Tucano was sold to Brasilia, Egypt, Honduras, Iraq, Venezuala, Peru, Argentina, Paraguay and Iran. A modified version, developed together with Shorts, was sold to the British RAF. There is also a production line in Egypt. The Embraer EMB.312 was born of a request by the Brazilian Aeronautics Ministry to design a basic trainer in use by the Brazilian Air Force. Designed in 1978 under Joseph Kovacs, the EMB.312 is a single-engine turboprop, low wing, equipped with a turbine Pratt &Whitney Canada PT6A-25C of 750shp, driving a three-bladed propeller, with student and instructor sitting in tandem under a single hood, opening sidelong. The ejection seats are placed so that the instructor, sitting behind in a higher position, has almost complete visibility ahead. On 6 December 1978, the Ministry of Aeronautics and Embraer signed an initial contract of development, including two prototypes and two examples for fatigue testing. The first prototype took off for the first time on 16 August 1980, registered as FAB 1300; the second prototype, FAB 1301, accomplished its first flight in December of the same year. A third prototype, incorporating the modifications foreseen for incorporation into the production models, received the experimental civilian registration PP-ZDK, and flew on 16 August 1982. The EMB.312 was christened Tucano (Toucan); receiving the FAB designation T-27 (or AT-27, for those used in light attack missions). From the 168 examples acquired, the first six examples were to equip the FAB Air Demonstration Squadron and these were delivered on 29 September 1983. The RAF’s basic flying trainer i

LED Program Card For Brushless ESC $15 Model LED Program Card (Version 2.0) Manual User Manual Accessory     Preview This program card is used to set the programmable parameters of brushless ESC, it has a friendly user interface to set the programmable parameters very easily. It is pocket-sized, so you can bring it to the racing or flying field conveniently.   This program card has 3 kinds of front panel to suitable for the following ESCs: A)  Product Number:  LED_PC2A       This is available for PLATINUM series aircraft/heli ESC;   B)  Product Number:  LED_PC2B       This is available for  SEAKING series boat ESC;   C)  Product Number:  LED_PC2C       This is available for  XERUN and EZRUN series (Version 2.0 ) car ESC;   The hardware and software of the above 3 models of program cards are identical, so you can print the different front panel when using the program card with different ESC.    1  Specification   1.1 Size:   88mm (L) * 58mm (W) * 14mm (H) 1.2 Weight:   40g. 1.3 Input Voltage:  4.8-6V (If the ESC hasn¡¯t a built-in BEC, you must use an additional battery pack to supply the program card)    2  Programmable Items   A)  The programmable items of LED_PC2A  (Available for PLATINUM series aircraft/heli ESC)   #1    Brake Setting #2    Battery Type #3    Low Voltage Protection Mode (Cutoff Mode) #4    Low Voltage Protection Threshold (Cutoff Threshold) #5    Start Mode #6    Timing #7    Governor Mode #8    Motor Type #9    PWM Frequency #10  Built-In BEC Output #11  Motor Load #12  Lipo Cells            Front Panel Picture of LED_PC2A: B)  The programmable items of LED_PC2B  (Available for SEAKING series boat ESC)  #1    Running Mode #2    Lipo Cells #3    Low Voltage Cutoff Threshold  #4    Timing            Front Panel Picture of LED_PC2B: C)  The programmable items of LED_PC2C  (Available for XERUN and EZRUN series car ESC of Version2)   #1    Running Mode #2    Drag Brake Force #3    Low Voltage Cut-Off Threshold #4  

Tail Rotor Blades Paddle $9.6 Tail Rotor Blades Paddle HM-4F200-Z-34

Tail Rotor Blades $3.6 Tail Rotor Blades HM-4F200-Z-35

Rudder servo Rod HM-CB180Z-Z-10 $3.4 Rudder servo Rod HM-CB180Z-Z-10

Stabllizer HM-CB180Z-Z-12 $3.4 Stabllizer HM-CB180Z-Z-12

Tail Boom Fixing Parts HM-CB180Z-Z-15 $3.8 Tail Boom Fixing Parts HM-CB180Z-Z-15

Tail Gear Holder HM-CB180Z-Z-16 $5.8 Tail Gear Holder HM-CB180Z-Z-16

Tail Steering Set HM-CB180Z-Z-17 $4.8 Tail Steering Set HM-CB180Z-Z-17

Rudder Servo Arm HM-CB180Z-Z-18 $4.4 Rudder Servo Arm HM-CB180Z-Z-18

Tail Biades Holder HM-CB180Z-Z-19 $6.8 Tail Biades Holder HM-CB180Z-Z-19

Bearing Set HM-CB180Z-Z-20 $3.8 Bearing Set HM-CB180Z-Z-20

Screw Set HM-CB180Z-Z-21 $4.8 Screw Set HM-CB180Z-Z-21

Tail Servo(WK-7601*1pc) HM-CB180Z-Z-23 $11 Tail Servo(WK-7601*1pc) HM-CB180Z-Z-23

Brushless motor HM-CB180Z-Z-24 $24.65 Brushless motor HM-CB180Z-Z-24

Brushless speed controller HM-CB180Z-Z-25 $36.95 Brushless speed controller HM-CB180Z-Z-25

Flybar screw HM-Creata400-Z-03 $5 Flybar screw HM-Creata400-Z-03 Flybar screw

L-shape linkage HM-Creata400-Z-04 $5 L-shape linkage HM-Creata400-Z-04 L-shape linkage

Flybar controller set HM-Creata400-Z-07 $17 Flybar controller set HM-Creata400-Z-07 Flybar controller set

Inner shaft HM-Creata400-Z-08 $5 Inner shaft HM-Creata400-Z-08 Inner shaft

EXI450 Replacement Parts: swashplate $12.87 swashplate EXI-31108

EXI450 Replacement Parts: stabilizer bar $1.1 stabilizer bar EXI-31109

EXI450 Replacement Parts: stabilizer blade $2 stabilizer blade EXI-31110

EXI450 Replacement Parts: main shaft holder $9 main shaft holder EXI-31112

EXI450 Replacement Parts: tail drive gear set $8.8 tail drive gear set EXI-31113

EXI450 Replacement Parts: carbon fibre battery tray $11.03 carbon fibre battery tray EXI-31114

EXI450 Replacement Parts: motor mount $3.9 motor mount EXI-31115

EXI450 Replacement Parts: anti-rotation bracket $3.8 anti-rotation bracket EXI-31116

EXI450 Replacement Parts: tail boom holder $8.7 tail boom holder EXI-31117

EXI450 Replacement Parts: carbon upper side frame $16.54 carbon upper side frame EXI-31118

EXI450 Replacement Parts: carbon bottom side frame $16.54 carbon bottom side frame EXI-31119

EXI450 Replacement Parts: tail holder $18.38 tail holder EXI-31121

EXI450 Replacement Parts: tail rotor control set (Plastic) $5.51 tail rotor control set (Plastic) EXI-31122

EXI450 Replacement Parts: tail rotor grip $14.6 tail rotor grip EXI-31123

EXI450 Replacement Parts: plastic horizontal/vertical tail fin $2.8 plastic horizontal/vertical tail fin EXI-31124

EXI450 Replacement Parts: tail blade $1.82 tail blade EXI-31125

EXI450 Replacement Parts: tail servo tray $5.7 tail servo tray EXI-31126

Walkera Dragonfly #4 RC Helicopter: Servo (1pc) $9 hm-004-z-26 Servo (1pc)

Walkera Dragonfly #4 RC Helicopter: Main Frame $10 hm-004-z-27 Main Frame

Walkera Dragonfly #4 RC Helicopter: Tail Motor Cable With JST Plug $2 hm-004-z-32 Tail Motor Cable With JST Plug

Walkera Dragonfly #4 RC Helicopter: Screw Set $8 hm-004-z-33 Screw Set

Walkera DragonFly 5-4 Version 4 Replacement Parts: Fly Bar Set $6 Fly Bar Set

Walkera DragonFly 5-4 Version 4 Replacement Parts: Main Rotor Blades x 4 $8 Main Rotor Blades x 4

Walkera DragonFly 5-4 Version 4 Replacement Parts: Main Blade Holder $4 Main Blade Holder

Walkera DragonFly 5-4 Version 4 Replacement Parts: Swashplate $6 Swashplate

Walkera DragonFly 5-4 Version 4 Replacement Parts: Ball Linkage Set $4 Ball Linkage Set

Walkera DragonFly 5-4 Version 4 Replacement Parts: Swashplate Guide Frame $4 Swashplate Guide Frame

Walkera DragonFly 5-4 Version 4 Replacement Parts: Small Shaft $6 Small Shaft

Walkera DragonFly 5-4 Version 4 Replacement Parts: Hollow Shaft $6 Hollow Shaft

Walkera DragonFly 5-4 Version 4 Replacement Parts: T-Shape Holder $4 T-Shape Holder

Walkera DragonFly 5-4 Version 4 Replacement Parts: Main Frame $8 Main Frame

Canopy $6.6 Canopy HM-4F200-Z-36

Bearing set $9.6 Bearing set HM-4F200-Z-37

Screw set $6.6 Screw set HM-4F200-Z-38

Servo (WK-7.6-6) (3 Pcs) $29 Servo (WK-7.6-6) (3 Pcs) HM-4F200-Z-39

Tail servo(WK-0902H) $13.6 Tail servo(WK-0902H) HM-4F200-Z-40

Main Rotor Blades HM-4G3-Z-01 $6.8 Main Rotor Blades HM-4G3-Z-01 Main Rotor Blades

Flybar Set HM-4G3-Z-02 $2.8 Flybar Set HM-4G3-Z-02 Flybar Set

Main Blades Holder HM-4G3-Z-03 $6.8 Main Blades Holder HM-4G3-Z-03 Main Blades Holder

Flybar Steering Ball HM-4G3-Z-04 $3.5 Flybar Steering Ball HM-4G3-Z-04 Flybar Steering Ball

Ball Linkage Set HM-4G3-Z-05 $5.8 Ball Linkage Set HM-4G3-Z-05 Ball Linkage Set

Flybar Connector HM-4G3-Z-06 $3.5 Flybar Connector HM-4G3-Z-06 Flybar Connector

Flybar Paddle HM-4G3-Z-07 $3.2 Flybar Paddle HM-4G3-Z-07 Flybar Paddle

Main Frame HM-4G3-Z-12 $9.5 Main Frame HM-4G3-Z-12 Main Frame

Swashplate HM-4G3-Z-08 $8.5 Swashplate HM-4G3-Z-08 Swashplate

Guide Ball HM-4G3-Z-09 $5 Guide Ball HM-4G3-Z-09 Guide Ball

Rotor Head Set HM-4G3-Z-10 $6.25 Rotor Head Set HM-4G3-Z-10 Rotor Head Set

Main Shaft HM-4G3-Z-11 $3.8 Main Shaft HM-4G3-Z-11 Main Shaft

EXI 500 Carbon: washers $2.7 washers

EXI 500 Carbon: main shaft cover $4 main shaft cover

EXI 500 Carbon: metal main rotor head assembly $99 metal main rotor head assembly

EXI 500 Carbon: servo holder $4.91 servo holder

EXI 500 Carbon: canopy spacers $2.1 canopy spacers

EXI 500 Carbon: linking ball $3 linking ball

EXI 500 Carbon: carbon &metal antii-rotation bracket $5.7 carbon &metal antii-rotation bracket

EXI 500 Carbon: CNC Metal base plate $16.95 CNC Metal base plate

EXI 500 Carbon: carbon tail support rod $8.58 carbon tail support rod

EXI 500 Carbon: Bearing $2.7 Bearing

EXI450 Replacement Parts: bearing $1.7 bearing EXI-BR0205025

EXI450 Replacement Parts: gear assembly $5.4 gear assembly EXI-31127

EXI450 Replacement Parts: horizontal fin band $4.41 horizontal fin band EXI-31128

EXI450 Replacement Parts: landing skid $2.5 landing skid EXI-31129

EXI450 Replacement Parts: tail boom $2.57 tail boom EXI-31132

EXI450 Replacement Parts: tail support rod $1.4 tail support rod EXI-31133

EXI450 Replacement Parts: canopy $2.5 canopy EXI-31134

EXI450 Replacement Parts: washers $6.5 washers EXI-31135

EXI450 Replacement Parts: linkage rod $2.8 linkage rod EXI-31136

EXI450 Replacement Parts: main gear $4.7 main gear EXI-31140

EXI450 Replacement Parts: main shaft cover $1.5 main shaft cover EXI-31141

EXI450 Replacement Parts: one way bearing hold $2.9 one way bearing hold EXI-31142

EXI450 Replacement Parts: metal horizontal/vertical tail fin $3.7 metal horizontal/vertical tail fin EXI-31143

EXI450 Replacement Parts: carbon fibre horizontal/vertical tail fin $4.5 carbon fibre horizontal/vertical tail fin EXI-31144

EXI450 Replacement Parts: tail drive gear shaft (2pcs) $2.92 tail drive gear shaft (2pcs) EXI-31145

EXI450 Replacement Parts: horizontal shaft set $2.94 horizontal shaft set EXI-31146

Walkera DragonFly 5-4 Version 4 Replacement Parts: Skid Landing Gear $4 Skid Landing Gear

---